|
|
|
|
|
Magnetic proximity sensors are used where high positional accuracy in sensing is required. Cylindrical magnet sensors are available from the smallest 2.5 mm diameter ultra-miniature packages to the standard 6.0 mm diameter packages. Threaded versions are suitable for applications where positional adjustment is required. Screw mountable magnet sensors can be directly mounted on enclosures, doors and windows. All of these sensors come in two versions, one for switching low level 10 W loads, and the other, for switching up to 60 W line voltage loads. This whole section is available as one PDF file here.
|
|
|
Omni polar, 12.0 mm long, switches loads of up to 1W, high reliability, configurable cable lengths and connectors.
|
|
|
|
|
Omni polar, 25.0 mm long, switches loads of up to 10W, 1.5A carry current capability, configurable cable lengths and connectors.
|
|
|
|
|
Omni polar, 25.0 mm long, switches loads of up to 30W, 2A carry current capability, configurable cable lengths and connectors, higher shock and vibration resistance.
|
|
|
|
|
Omni polar, 25.0 mm long, switches loads of up to 60W line voltage, 2.5A carry current capability, configurable cable lengths and connectors, higher shock and vibration resistance.
|
|
|
|
|
Omni polar, 0.5 mm pitch M5 thread for accurate positioning and locking, switches loads of up to 10W, configurable cable lengths and connectors.
|
|
|
|
|
MS-228 M8 Threaded Cylindrical Proximity Sensor
0.75 mm pitch M8 thread. Rugged body and high wall thickness of sensor withstands shock and vibration in industrial environments, switches loads of up to 60W, configurable cable lengths and connectors.
|
|
|
|
|
Screw mountable, 4.0 mm slot widths, matching actuator magnet, capable of switching 10 W low level voltages, shielded cables available on request, configurable cable lengths and connectors.
|
|
|
|
|
Screw mountable, 8.0 mm slot widths, matching actuator magnet, capable of switching up to 60 W line voltage, shielded cables available on request, configurable cable lengths and connectors.
|
|
|
|
|
Selecting the right AT band and magnet for an application is best done by going through our AT band FAQ and our magnet selection guide. Operate and release distances for all standard magnet sensors in...
|
|
|
|
